CTC Union IPCAM-8309FW Bedienungsanleitung PDF herunterladen (Seite 49)

Chapter#4 How to Use

4.4.10 Alarm Buffer

On this page you can set the Pre-alarm image and audio (the image and audio before the alarm

detection) and the Post - alarm image and audio. These can be set when Alarm sending FTP

client setting menu or Image memory setting menu is set to On, and also when Use alarm

buffer is selected.

Setting

Video Mode: The video mode of alarm buffer is MPEG-4.

Alarm buffer：To activate the Alarm buffer function, select On. The basic setting options are

displayed below. When you do not use the Alarm output function, select Off.

Recording capacity

Pre-alarm period：Display the maximum recording capacity of image/audio before the

alarm detection.

Post-alarm period：Display the maximum recording capacity of image/audio after the alarm

detection.

Recording time

Set the recording time for the Pre-alarm image/audio and Post alarm image/audio.

Pre alarm period：Type it with recording time of the image/audio before the alarm detection.

Post alarm period：Type it with recording time of the image/audio after the alarm detection.

Note：

• The value of Recording capacity differs depending on Image size, bit rate (for MPEG4)

and Image quality (for MPEG4 and MJPEG) in the camera setting menu.

1 2 ... 44 45 46 47 48 49 50 51 52 53

Keine Kommentare

CTC Union IPCAM-8309FW Bedienungsanleitung Seite 49