CTC Union IPCAM-8309FW Bedienungsanleitung PDF herunterladen (Seite 44)

4.4.6.2 Alarm sending

Use this page to setup the alarms used to trigger actions such as sending mail, sending to

FTP server or sending to HTTP server.

Alarm sending：Select On to set the alarm detection action.

Motion Detection：Click On to use Motion Detection function as a sensor. You can set the

details on the motion detection function page.

Note：

• Motion Detection works only when the Video mode is set to MPEG4 and Cropping is

set to Off.

Alarm Buffer：Select Use alarm buffer when you wish to forward the image/ audio of before

and after the alarm detection (pre-alarm, post-alarm). If you do not select it, only the image of

the moment of the alarm detection is forwarded. Click Alarm buffer to display the Alarm buffer

setting menu. For details, see “Setting the Alarm Buffer — Alarm buffer setting Menu on page.

Alarm Input：

Select the connected alarm.

Sensor input1: The external sensor which is connected to sensor input1 of the camera

I/O port.

Effective period：Set the period when the periodical sending is effective.

Always：The periodical sending is always effective.

Schedule：You can specify the period when the periodical sending is effective in the

schedule setting in the other section. Click Schedule and the setting menu for the

effective period is displayed.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 52 53

Keine Kommentare

CTC Union IPCAM-8309FW Bedienungsanleitung Seite 44