
CHAPTER 4 How to Use
SMTP server name:Type the SMTP server name, up to 64 characters, or the IP address of
the SMTP server.
Authentication:Select the authentication method required when you send an email.
Off: Select if no authentication is necessary when an email is sent.
On: When authentication is necessary, to send an e-mail, select one of the authentication
methods from the following.
SMTP: Select if SMTP authentication is necessary when an e-mail is sent.
POP before SMTP: Select if POP before SMTP authentication is necessary when an e-mail is
sent.
Note:
• When you set to On, be sure to select either or both SMTP or/and POP before SMTP.
POP server name:This is necessary when the POP before SMTP is selected in
Authentication. Type the POP (receiving mail) server name, up to 64 characters, or
type the IP address of the POP server. This setting is necessary when the SMTP server
which sends e-mails performs authentication using the POP user account.
User name, Password:Type the user name and Password of the user who has the mail
account. This setting is necessary when the SMTP server which sends e-mails performs
authentication.
Recipient e-mail address:Type the recipient e-Mail address, up to 64 characters. You
can specify up to three recipient E-mail addresses.
Administrator e-mail address:Type the Administrator e-Mail address, up to 64
characters. This address is used for reply mail and sending system messages from the
SMTP server.
Attached File Type: Select to attach the file as JPEG or MPEG4.
Subject:Type the subject/title of the e-Mail, up to 64 characters. With respect to mail
which is sent according to the alarm detection when Alarm sending of the alarm tab is
set to On, the characters standing for the sensor type are added to the subject.
Message:Type the text of the E-mail, up to 384 characters. (A line break is equivalent to
2 characters.)
Kommentare zu diesen Handbüchern