CTC Union IPCAM-8309F Bedienungsanleitung PDF herunterladen (Seite 32)

CHAPTER 4 How to Use

4.1.1.2 Alarm sending

This function is used to forward the image and audio file to the specified FTP server when

an alarm is detected by an external sensor input or by the built-in motion detection function.

Select On to send the image and audio file to FTP server triggered by the alarm detection.

Remote path：Type the path to the destination on the FTP server, up to 64 characters.

Image file name：Type the file name to assign to the images when sending to the FTP server.

You can use up to 10 alphanumeric characters, - (hyphen), _ (underscore) for naming.

Suffix：Select a suffix to add to the file name:

Date & time: The date & time suffix is added to the Image file name. The date/time suffix

consists of lower two-digits of year, month, date, hour, minute, second, and consecutive

number (All 2 digits), thus 14-digit number is added to the file name.

Sequence number: A consecutive number of 10 digits between 0000000001 and

4294967295 and two fixed digits 00 are added to the Image file name.

Motion Detection：Click On to use Motion Detection function as a trigger. You can then

setup the motion detection function page.

Note：Motion Detection works only when the Video mode is set to MPEG-4 and Cropping is

set to Off.

Effective period：Set the period when the periodical sending is effective.

Always：The periodical sending is always effective.

Schedule：You can specify the period when the periodical sending is effective in the

schedule setting in the other section. Click Schedule and the setting menu for the effective

period is displayed.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

Keine Kommentare

CTC Union IPCAM-8309F Bedienungsanleitung Seite 32