CTC Union ET100A Bedienungsanleitung PDF herunterladen (Seite 11)

ET100 LAN-WAN Bridge

(1) WAN Rx LED:

Yellow, on or flashing indicates receiving data on the WAN

interface.

(2) WAN Tx LED:

Yellow, on or flashing indicates transmitting data on the WAN

interface.

(3) LAN Link LED:

Green, indicates the Ethernet has a link to an external device.

(4) LAN Rx LED:

Yellow, flashes to indicate reception from the LAN.

(5) LAN Tx LED:

Yellow, flashes to indicate transmission to the LAN.

(6) DB25 Male Connector:

This connector connects to the appropriate adapter cable for

connection to the various supported data interfaces. The ET100

performs in DTE mode and its WAN port connector may be

connected to a DCE device (such as a modem).

(7) SW1:

Configuration setting for the bridge. (Please refer to DIP SW

setting table.) Connection to the Ethernet LAN is made here.

(8) SW2:

Configuration setting for the bridge. (Please refer to DIP SW

setting table.) Connection to the Ethernet LAN is made here.

(9) RJ-45 Ethernet LAN Port:

This is an auto-MDI/MDIX port for connection to the LAN.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 33 34

Keine Kommentare

CTC Union ET100A Bedienungsanleitung Seite 11