CTC Union IPCAM-8318IR Bedienungsanleitung

8318IR User Manual 0 USER MANUAL IPCAM-8318IR CTC Union Technologies Co., Ltd.

9 2.2 Mac Web Browser 1. Click the Safari icon, and enter the IP address of the IP camera in the Location / Address field of your browser.

10 2. Use the default account “admin” and default password “admin”. Note : The default user name “admin” and the password are set at th

11 3. The monitor image will be displayed in your browser. In the far left side of main configuration are Setting, Client Setting, and Imag

12 Chapter3 . Configuration of Main Menu In the far left side of main configuration are Setting, Client Setting, Image Setup. For more detai

13 3.1 Live View A. Snapshot You can capture a still image shot by the camera and save it in your computer. B. Zoom in / out the

14 C. Video play buttons Symbols Meaning Pause the current video Play the video Stop the current video Record the current video D. Au

15 3.2 Setting This function is only for the Administrator. Click this button to get into the Basic and Advance settings menu. Click Ba

16 3.3 Client Setting This function is only for the client. Click this button to control Mode, View Size, Protocol, and Video Buffer. 3.3.

17 3.4 Image Setup You can use the tool bar to optimize video Brightness, Contrast, Saturation and Hue. 3.4.1 Brightness The higher valu

18 Chapter 4. Setting-Basic Click the folder of Basic to display the sub folders including System, Camera, Network, and Security.

8318IR User Manual 1

19 4.1 System Click the folder of System to display the sub-folders including Information, Date / Time, and Initialize.

20 4.1.1 Information The Information page provides the product factory information which includes Product Name, Firmware Version and Web Ver

21 4.1.2 Date / Time The Date/ Time page displays all options of time setting.  Current date / time: This displays the current date and ti

22 4.1.3 Initialize  Reboot: Click this bottom to reboot this IP Camera. A confirmation dialogue will appear and then click “OK” to proces

23  Upload Language Pack: Upgrade the device language pack. Click “Browse” and select the file for upgrading. A confirmation dialogue will

24 4.2 Camera Click the folder of Camera to display the sub folders including General, MPEG4 and MJPEG.

25 4.2.1 General  RTSP : Switch On / Off Note: RTSP (Real Time Streaming Protocol) is a protocol for use in streaming media s

26 4.2.2MPEG4 A. Computer View  RTSP (if RTSP mode is On, please check “Setting → Basic → Camera → General ”)  RTSP Port: Specify the t

27  Fixed Quality: You can select the value of quality among Medium, Good, Delicate and Excellent.  Fixed Bitrate: Set the bitr

28 B. Mobile View  RTSP (if RTSP mode is On, please check “Setting → Basic → Camera → General”)  RTSP Port: Specify the transmission port

8318IR User Manual 2 LEGAL The information in this publication has been carefully checked and is believed to be entirely accurate at the ti

29 4.2.3 MJPEG  MJPEG Viewer Port( If RTSP is off, please check “Setting → Basic → Camera → General”):  Unicast Streaming Vi

30 4.3 Network Click the folder of Network to display the sub folders including Information, PPPoE, DDNS, UPnP, Bonjour, IP Notification.

31 4.3.1 Information Display the MAC address of the device.  Obtain an IP address automatically (DHCP): If a DHCP server is installed on

32  Use the following IP address: Select this when the fixed IP address is set. IP address: Enter the IP address of the device. Subnet m

33 4.3.2 PPPoE (Point-to-Point Protocol over Ethernet) If your ISP provides Dynamic IP with authentication by username and password, type

34

35  Use the following DNS server address: Select this when you set the fixed address as the IP address of DNS server.  Primar

36 4.3.3 DDNS (Dynamic DNS) DDNS is a system which allows the domain name data held in a name server to be updated in real time. The most co

37 Note : How to apply DDNS username and Host name?? You can apply DDNS username and Host name by the following steps: 1. Login http://w

38 3. Login with new account and click Account → My Hosts → Add Host Services 4. Type domain in the Hostname field and select sub-domain

8318IR User Manual 3 CTC Union maintains a support web site (support.ctcu.com) where you may obtain the latest manual, quick installation g

39 5. After type information, check your DDNS service. 6. Type your DDNS User ID, Password and Host name in Setting → Network → DDNS. Afte

40 4.3.4 UPnP (Universal Plug and Play) If you have a Router to access to internet and the Router supports UPnP IGD function, you need to

41 computer. It provides Port Forwarding for opening a port in a router or firewall in a private network in order to l

42 4.3.5 Bonjour Bonjour, also known as zero-configuration networking, enables automatic discovery of computers, devices, and services on IP

43

44 4.3.6 IP Notification When network notify type is set to “ON”, you can send an e-mail notification of the completion of th

45  Authentication: Select the authentication required when you send an email. Off: Select if no authentication is necessary when an e

46 network information including IP, Port, MAC, Model, Firmware Version and Web Version. 4.4 Security Click the folder of Security to disp

47 4.4.1 Account The device fault account and password setting is “admin / admin”. That means everyone who knows IP address can access the d

48 4.4.2 HTTPS HTTPS is a URI scheme used to indicate a secure HTTP connection. It is syntactically identical to the http:// sc

8318IR User Manual 4 Copyright, All rights reserved. 8318IR IP Camera User Manual - Contents - CHAPTER 1. MINIMUM SYSTEM REQUIREMENT

49

50 Chapter 5. Setting-Advance Click the folder of Advance to display the sub folders including FTP client, SMTP, HTTP event, Schedule, Alarm

51 5.1 FTP Client Use this menu to set up for capturing and sending images to an FTP server. By using FTP client function, you can send the

52 5.1.1 General Select “On” when you use FTP function. The FTP client setting page appears. Select “Off”, when you do not wish to use the

53 5.1.2 Alarm sending Set to forward the image and video file to the specified FTP server linked with the alarm detection by the exte

54  Alarm  Motion Detection: Click it on for using Motion Detection function as a sensor. You can set motion detection function at the mo

55  Use Alarm Buffer：：：：Select Use alarm buffer when you forward the image and video of before and after the alarm detection (pre-alarm, po

56

57 5.1.3 Periodical sending You can set to send an image file to FTP server periodically by selecting On to send the image file to FTP serve

58  Effective period: Set the period when the periodical sending is effective. Always: The periodical sending is always effective. Sche

8318IR User Manual 5 User Manual Overview  Housing- IP66 related protection against dust and heavy rain  Reset - When

59 5.2 SMTP Set the SMTP menu when you want to send an image via e-mail. By using Mail (SMTP) function, you can send a mail with attach

60 5.2.1 General Select On when you use the SMTP function. The common setting options are displayed below. Select Off, if you do not wish

61  Authentication: Select the authentication required when you send an email. Off: Select if no authentication is necessary when an em

62 mail which is sent according to the alarm detection when Alarm sending of the alarm tab is set to On, the characters standing for the sen

63 5.2.2 Alarm sending Set to send the mail with connection to the alarm detection by the external sensor input or by the built-in motion de

64  Alarm  Motion Detection: Click it on for using Motion Detection function as a sensor. You can set motion detection function at the m

65  Use Alarm Buffer：：：：Select Use alarm buffer when you forward the image and video of before and after the alarm detection (pre-alarm, po

66

67 5.2.3 Periodical sending You can set to send an image file by SMTP server periodically by selecting On to send the image file by SMTP ser

68  Effective period: Set the period when the periodical sending is effective. Always: The periodical sending is always effective. Sch

8318IR User Manual 6  Network Connector - For connection to the Ethernet via RJ-45 standard with PoE  Network Indicator (Green Light) -

69 5.3 HTTP event Use this menu to set up for capturing and sending images to an HTTP server. By using HTTP client function, you can send th

70 5.3.1 General  HTTP event: Set up the HTTP server URL, port, User ID, Password, and Proxy Server settings. For example: URL: 1

5.3.2 Alarm sending Set to send the mail with connection to the alarm detection by the external sensor input or by the built-in motion detection funct

 Alarm  Motion Detection: Click it on for using Motion Detection function as a sensor. You can set motion detection function at the motion

For example: PTZ down. Use Alarm Buffer: Select Use alarm buffer when you forward the image / audio of before and after the alarm detectio

 Effective period: Set the period when the periodical sending is effective. Always: The periodical sending is always effective. Schedu

5.4 Schedule When you click Schedule on the Advance mode menu, the Schedule setting menu appears. This is the same menu as the s

5.4.1 Setting  Schedule Selection: Select the list box to specify the schedule you want to set. FTP -Alarm FTP - Periodical e-Mai

5.5 Alarm buffer You can set the Pre-alarm image and audio (the image and audio before the alarm detection) and the Post - alarm image and

5.6 Motion Detection There are three Motion Detection functions as sensors to set for different detecting zones. Each one has Th

7 Chapter 2. Using IP Camera via Web Browser 2.1Windows Web Browser 1. Start your web browser, and enter the IP address or host name of the

5.6.1 Setting  Threshold: It means the extent which the alarm will be triggered.  Sensitivity: It means that how often the senso

5.7 System Log The System Log function allows users to review any changes and events happened. The system starts logging automatically after

CHAPTER 6. APPENDIX APPENDIX A – FRAME RATE & BIT RATE TABLE This chapter provides tables that help you to optimize your IP camera with

A.3 MJPEG @ 15fps / kbps Quality 640*480 320*240 160*120 Excellent 4000 1500 600 Detailed 2400 900 400 Good 1600 650 300 Standar

APPENDIX B – STORAGE REQUIREMENT TABLE This chapter provides tables that help you set your recording storage system. Please refer to the fol

CTC Union Technologies Co., Ltd. Far Eastern Vienna Technology Center (Neihu Technology Park) 8F, No.60, Zhouzi Street N

E-mail：[email protected] Url：http：//www.ctcu.com

8 3. The monitor image will be displayed in your browser. In the far left side of main configuration are Setting, Client Setting, and Image